Login | Contact Us
View Cart | Checkout | Items:, Value:
Online Catalogue | Problem Solvers
Quantity:
Switchable balanced in-line attenuator Link to Manufacturer Information
Bridging transformer that matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels Link to Manufacturer Information
High pass filter which rolls off low audio frequencies to reduce 60 Hz electrical hum, low-frequency wind noise, air conditioner noise, or stand- and floor-transmitted low-frequency vibrations Link to Manufacturer Information
Line input adapter which has a balanced bridging input with 50 dB attenuation Link to Manufacturer Information
Switchable polarity reverser permits instant switch selection of either normal or reversed polarity in any balanced line (including microphone or line level) cable Link to Manufacturer Information
Microphone level tone generator which is battery-powered 700 Hz signal source that can be used to troubleshoot low-impedance, balanced-line microphone inputs Link to Manufacturer Information
Line Matching Transformer, Low Impedance Female XLR to High Impedance 1/4-inch Phone Plug. Provides 24 dB of voltage gain and may be used in reverse Link to Manufacturer Information
Line Matching Transformer, Low Impedance Male XLR to High Impedance MC1M Connector with Mating 1/4-inch Phone Plug/Jack Link to Manufacturer Information
Line Matching Transformer, Low Impedance Female XLR to High Impedance MC1M Connector with Mating 1/4-inch Phone Plug/Jack Link to Manufacturer Information
Camcorder Interface, Low-to-Medium Line Matching Transformer, Low Impedance Female XLR to Medium Impedance Mini Plug on Attached 2-foot (0.6 m) Cable, DC Bias Filter Link to Manufacturer Information
In-Line Switch can be used to add an On/OFF, Push-To-Talk, Cough Button, or Transmitter-Relay Keying function to a microphone or other device rated at up to 3 amps ac (0.5 Adc) 125V, non-inductive load. The unit is supplied with a crimp-on strain relief for 6.4mm (0.25-in.) diameter cable and with a flex relief for either large or small diameter cables Link to Manufacturer Information
Blaydon Communications Limited - Registered in England No 1051050
