Err - 0191 4144241
Blaydon Communications Limited - JustMics
Audio Technica PRO42 Miniature Boundary Microphone

Audio Technica PRO42 Miniature Boundary Microphone

Audio Technica Mics
(Code: AT_PRO42)
£ 99.00
£ 94.06

About Audio Technica PRO42 Minatare Boundary 


Audio Technica's PRO42 miniature Boundary Microphone has a very low profile design to provide the most discrete installation. Thanks to the wide range condenser element the microphone still picks up every detail of the required audio so don't let its small size fool you.

The PRO42 has a unidirectional pick up pattern that helps to reject unwanted noise and whilst this makes placement of the microphone critical to its performance the audio reproduction is second to none. The unit comes with a fixed 7.6m lead that is terminated in a 3 pin male XLR plug for connection directly into most professional audio amplifiers and mixers.

The applications for the PRO42 are many including boardrooms, schools and education, government and houses of worship. The unit is designed for the sound reinforcement, broadcasting and recording sectors so you can be assured of a crisp, intelligible response.

Technical Specifications include
  • Weight: 35 g
  • Element: Condenser
  • Impedance: 100 Ohms
  • Polar Pattern: Half-cardioid 
  • Frequency Response: 70 - 14000Hz
  • Cable: 25" long - permanently attached 
  • Signal-to-Noise Ratio: 65 dB; 1kHz @ 1 Pa
  • Dynamic Range: 105 dB; 1kHz @ max SPL
  • Output Connector: Integral 3-pin XLRM-type
  • Open Circuit Sensitivity: - 38dB (12.5mV) re 1V @ 1 Pa
  • Phantom Power Requirements: 9 - 52V DC; 2 mA typical
  • Maximum Input Sound Level: 134 dB SPL; 1kHz @ 1% T.H.D
  • Dimensions: 1.44" (36.6mm) max width; 2.14" (54.3mm) max length; 0.61" (15.5mm) max height
Blaydon Communications Limited, Factory Road, Blaydon, Tyne and Wear, NE21 5RY.
Registered in England 01051050 

Telephone 0191 4144241 | Email [email protected]