Err - 0191 4144241
Blaydon Communications Limited - JustMics
Audio Technica PRO42 Miniature Boundary Microphone

Audio Technica PRO42 Miniature Boundary Microphone

Audio Technica Mics
(Code: AT_PRO42)
£ 99.00
£ 94.06

About Audio Technica PRO42 Minature Boundary MIcrophone

Audio Technica's PRO42 minature boundary microphone has a very low profile design to provide the most discrete installation. Thanks to the wide range condensor element the microphone still picks up every detail of the required audio so don't let its small size fool you.

The PRO42 has a unidirectional pick up pattern that helps to reject unwanted noise and whilst this makes placement of the microphone critical to its perfomance the audio reproduction is second to none. The unit comes with a fixed 7.6m lead that is terminated in a 3 pin male XLR plug for connection directly into most professional audio amplifiers and mixers.

The applications for the PRO42 are many including boardrooms, shools and education, government and houses of worship. The unit is designed for the sound reinforcement, broadcasting and recording sectors so you can be assured of a crisp, intelligible response.

Here's the technical stuff:

Element Condenser
Polar Pattern Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response 70 - 14,000 Hz
Open Circuit Sensitivity -38dB (12.5mV) re 1V at 1 Pa
Impedance 100 ohms
Maximum Input Sound Level 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 105 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 9-52V DC, 2 mA typical
Weight 35 g
Dimensions 1.44" (36.6 mm) maximum width, 2.14" (54.3 mm) maximum length, 0.61" (15.5 mm) height
Output Connector Integral 3-pin XLRM-type
Cable 25' (7.6 m) long, permanently attached
Blaydon Communications Limited, Factory Road, Blaydon, Tyne and Wear, NE21 5RY.
Registered in England 01051050 

Telephone 0191 4144241 | Email [email protected]