Facebook_Pixel_IMG

Saramonic Blink 500 B2 Ultracompact Dual Wireless System

Saramonic
(Code: SR024524)
£ 240.00
£ 216.00
-10%
2000g

 

If you're looking for an extremely small wireless microphone system for use with cameras and mobile devices with the ability to handle two wireless transmitters so you can record two separate people, then look no further. The Saramonic Blink 500 B2 lets you record broadcast quality sound from two wireless transmitters simultaneously to your camera or smartphone, and offers unrivalled versatility.

This kit comes with two Blink 500 TX wireless transmitters which feature built-in microphones. They're small enough to be clipped onto a shirt or hidden inside your pocket, or they can even be used as a handheld or set on a desk.

They also double up as traditional bodypack transmitters when used with the included SR-M1 omnidirectional clip-on lavalier microphones, so no matter what the requirements you'll be able to record crystal-clear professional audio.

One of the issues faced when recording sound for video is controlling the audio levels. Depending on the person speaking, you may need to raise or lower the levels based on how loudly they talk. That's why the Blink 500 TX transmitters have easy to use gain buttons to raise or lower the levels as required, and the LED displays let you know just where they're set.

The Blink 500 TX units have an internal lithium battery which offers 5 hours of use from a single charge, and the USB-C port can be used to recharge the units if you're out in the field with a portable USB battery pack (not included).

The Blink 500 TX are simple to use; you turn them on, and they work. But in the background, the Blink 500 system is doing a lot to ensure excellent performance. It transmits on the interference free 2.4GHz spectrum, and it automatically switches channels to avoid static interference and audio dropouts. The 10-milliwatt power of the transmitters give an impressive range of 98ft (30 meters) with obstacles, and up to 164ft (50 meters) in unrestricted open spaces.

Both TRS and TRRS output cables are included so if you have a DSLR, mirrorless, or other type of camera, or a smartphone or tablet that has a headphone jack then the system will work perfectly.

The Blink 500 RX receiver can be shoe mounted onto your camera and because it's a dual channel receiver, you'll be ready to record from both transmitters simultaneously. The receiver output provides a strong noise-free level, so you can adjust the input level of your camera to avoid hearing the noisy pre-amp.

The Blink 500 B2 is ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers or any content creator in need of a portable, compact and easy to use wireless system that will still deliver professional quality sound. It's small enough to fit into any camera bag or backpack, and you can even put it in your pocket so transporting the system is effortless.

It's the perfect choice for people who need an easy to use, ultra portable 2 person wireless system for their camera or smartphone that can deliver professional quality sound.

In the box you get the following items:

2 x Blink 500 TX Transmitter with Built-In Microphone and Clip
1 x Blink 500 RX Receiver with Built-In Clip and Camera Shoe-Mount
2 x SR-M1 Omnidirectional Lavalier Microphone
2 x Alligator-Style Lavalier Microphone Clip
2 x Foam Lavalier Windscreen
1 x 1' (30.5cm) Gold-Plated 3.5mm TRS to TRS Output Cable for Cameras
1 x 1' (30.5cm) Gold-Plated 3.5mm TRRS to TRRS Output Cable for Smartphones and Tablets
3 x 1' (30.5cm) Gold-Plated USB-C to USB-A Charging Cables
1 x Pairing Pin

Transmitter Specifications:

The frequency is 2.4GHz
The RF Output Power is 10 mW
The Signal to Noise Ratio is ≥70dB
The Voice Delay is ≤6ms
The Reference Audio Input Level is -30 to -42dBv (Microphone Input, 0 dB Attenuation)
The Audio Gain Control is 11dB, 18dB, 25dB
The Distortion is ≤0.1%
The Digital Resolution is 24-bit / 48kHz
The Frequency Response is 20Hz to 16kHz
The Max Operating Range is 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
The Max Number of Simultaneous Systems is 18 (up to 36 Microphones)
The Antenna is a Built-in 1/4λ Wire Antenna
The Battery is a Built-in Li-ion 3.7V / 400mAh
The Approx. Battery Life is 5 hours
The Charging Connector is a USB Type-C (1.5 hours to be fully charged)
The Input is a 1/8'' (3.5mm) Microphone Input
The Microphone is a Built-In Pressure Operated Electret Condenser
The Microphone Pickup Patterns are Omnidirectional (Built-In Microphone and External Lavalier)
The Microphone Frequency Range is 50Hz-18KHz (Built-In Microphone and External Lavalier)
The Microphone Equivalent Noise Level is >58dB (Built-In Microphone and External Lavalier)
The Maximum SPL is 120dB (Built-In Microphone), 110dB (External Lavalier)
The Mounting Clip is Built-In
The Operating Temperature is 0℃ to 50℃
The Storage Temperature is -20℃ to +50℃
The Dimensions are 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
The Weight is 1.2 oz (34g)

Receiver Specifications:

The Frequency is 2.4GHz 
The Signal to Noise Ratio is ≥70dB
The Voice Delay is ≤6ms
The Distortion is ≤0.1%
The Digital Resolution is 24-bit / 48kHz
The Frequency Response is 20Hz to 16kHz
The Max Operating Range is 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
The Antenna is a Built-In 1/4λ Wire Antenna
The Battery is a Built-in Li-ion 3.7V / 400mAh
The Approx. Battery Life is 5 hours
The Charging Connector is a USB Type-C
The Output is a 1/8' 3.5mm Jack (Headphone Compatible)
The Audio Output Level is 5dB
The Operating Temperature is 0℃ to 50℃
The Storage Temperature is -20℃ to +50℃
The Dimensions are 2.4 x 1.3 x .61” (62 x 33 x 15mm)
The Weight is 1.09 oz (31g)

 

 
Blaydon Communications Limited, Factory Road, Blaydon, Tyne and Wear, NE21 5RY.
Registered in England 01051050 

Telephone 0191 4144241 | Email [email protected]