Microphones, Microphone Systems & Accessories
Search Your Cart   Continue Shopping

Audio Technica System 10 PRO Rack-Mount 2.4GHz Digital Wireless System

(Code: AT-1332)
£ 700.00
Add to cart
Audio Technica System 10 PRO Rack-Mount 2.4GHz  Digital Wireless SystemAudio-Technica’s System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.

Each System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one or two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter, and one or two ATW-T1001 UniPak® body-pack or ATW-T1002 handheld transmitters, or one of each. Both the receiver chassis and transmitters feature easy-to-read displays.


Features:
  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance.
  • Operates in the 2.4 GHz range – completely free from TV interference.
  • Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility.
  • Up to five chassis (ten receiver units) can be linked and used simultaneously.
  • Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations.
  • Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status.
  • Automatic frequency selection for seamless, interference-free operation.
  • Extremely easy operation with instantaneous channel selection, sync, and setup.
  • Three levels of diversity assurance: frequency, time & space.
  • Ground-lift switch helps eliminate audible hum caused by ground loops.

Overall Specifications:


Operating Frequencies: 2.4 GHz ISM band 
Dynamic Range:  >109 dB (A-weighted), typical 
Total Harmonic Distortion <0.05% typical
Operating Range: 60 m (200') Open range env. with no interfering signals
Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures 
 Frequency Response:  20 Hz to 20 kHz (Depending on microphone type )




Receiver Specifications:



Receiving System Diversity (frequency/time/space)
Output Connectors Remote Receiver Connector: RJ45 Link Connector: RJ12
Maximum Output Level XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply  100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Dimensions 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
Net Weight 940 grams (33.2 oz)
Accessory Included Power supply
Accessories Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet


Body-Pack Transmitter Specifications:


RF Power Output  10mW
Spurious Emissions  Following federal and national regulations
Input Connections  Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Batteries  Two 1.5V AA not included
Battery Life  >7 hours (alkaline) Depending on battery type and use pattern
Dimensions  70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Net Weight  100 grams (3.5 oz) without batteries



Handheld Transmitter Specifications:


RF Power Output  10mW
Spurious Emissions  Following federal and national regulations
Batteries:   Two 1.5V AA not included
Battery Life:   >7 hours (alkaline) Depending on battery type and use pattern
Dimensions:  254.8mm (10.03") long, 50.0 mm (1.97") diameter
Net Weight  280 grams (9.9 oz) without batteries
Accessory Included  AT8456a Quiet-Flex stand clamp

 
Blaydon Communications Limited, Factory Road, Blaydon, Tyne and Wear, NE21 5RY.
Registered in England 01051050 

Telephone 0191 4144241 | Email sales@blaydoncomms.co.uk