Err

TOA PM660D Paging Microphone

TOA
(Code: TOA_PM660D)
£ 95.58
£ 76.46
-20%
2000g

About TOA PM660D Paging Microphone



TOA's PM660D comes complete with a 2.5m long lead terminated in a 5 pin, 180 degree, DIN plug. It is ideal to plug into TOA amplifiers that have a 5 pin din connection and can also be used with other manufacturers equipment but you'll need to check the pin configuration first. We can help with this so just get in touch if you need assistance. If you need a microphone with a 1/4" jack then the PM-660 will be an option for you or you can buy the unterminated PM-660U and fit your own connector. 

The PM660D is a single zone or all call paging microphone and can be used in all general paging announcement applications. Easy operation via the single press to talk button or via the call locking switch ideal for longer broadcasts.

Here's the technical stuff:

TypeMoving coil microphone
Polar PatternUnidirectional
Rated Impedance600 Ω, Balanced
Rated Sensitivity-58 dB (1 kHz, 0 dB=1 V/Pa)
Frequency Response100 Hz - 10 kHz
Output4-conductor (2-shielded) cable (2.5 m (8.2 ft)) with 5-pin DIN plug
Talk Switch1-push-to-talk switch, 1-locking lever, Short-off type
Remote Control500 mA or less at 30 V DC
Operating Temperature-10 ℃ to +50 ℃ (14 ゜F to 122 ゜F)
Operating Humidity95 %%%RH or less (no condensation)
FinishMicrophone head: Zinc plated steel wire, gray baked paint
Main unit: ABS resin, gray
Dimensions100 (W) × 215 (H) × 150 (D) mm (3.94" × 8.46" × 5.91")
Weight440 g (0.97 lb) (cord excluded)

 
Blaydon Communications Limited, Factory Road, Blaydon, Tyne and Wear, NE21 5RY.
Registered in England 01051050 

Telephone 0191 4144241 | Email [email protected]